Temporary anchoring devices

To ensure a safe anchorage for operators equipped with the appropriate PPE for temporary work at height (installation of components and elements of a fall arrest system) or where it is not possible to install permanent anchoring devices, different solutions are available for temporary anchorage both type spot and linear.

All temporary anchorage devices shall comply with the technical standard EN 795 PPE as 3rd category, and are CE marked in accordance with Directive 89/686/EEC (Legislative Decree no. 475/1992 ) .
The use of temporary anchorage devices involves the design of an appropriate fall protection system that takes into account the clearance space, the pendulum effect and possible fall factors .

Type B temporary belt anchor points ensure the ergonomics required for work at height which involve small operator displacements, while the type B temporary anchor lines, built from textiles, allowing the worker a greater freedom of movement.

Type E anchorage devices, with an anchor point, are available with neoprene bags filled with water or concrete blocks joined by aluminum arms and stainless steel screws.